99.7% Li-ceramics tsa Alumina tse Tsoetseng Pele
Bohloeki bo phahameng ba Alumina Ceramics (Al)2O3:>99.7%）
-Poleiti ea ho Sebeletsa ea Alumina Wafer / Tafole ea ho Phetla
-Boto ea Base ea Alumina e Hloekileng ea Boholo bo Holimo bakeng sa Lisebelisoa tsa Tlhahiso ea LCD
Boitsebiso:
Alumina e Hloekileng HaholoAl2O3:>99.7%
Kopo:
Liindasteri tsa semiconductor, peterole, lik'hemik'hale, photovoltaic, LCD jj., joalo ka likarolo tsa mechini, likarolo tsa elektroniki, disk ea induction ea microwave, likarolo tsa insulation. Tse kang lisebelisoa tsa tlhahiso ea semiconductor, lisebelisoa tsa vacuum, lisebelisoa tsa tlhahiso ea kristale ea metsi le likarolo tse ling. Mohlala, boholo bo boholo ba alumina ea ceramic Wafer Polishing Plate / Turn Table ke karolo ea bohlokoa ea CMP ho polishing ea mechini ea lik'hemik'hale, Alumina Baseboard bakeng sa LCD.
Likaroloana:
Al e hloekileng haholo2O399.7% -99.9%
Matla a Phahameng a Mechini
Khanyetso e Phahameng ea ho Aparela
Ho Sireletsa Motlakase ka Matla a Phahameng
Ho tšoarella ha lik'hemik'hale tse phahameng
Ho Hanela Mocheso le Mafome ka Tsela e Ntle
Molemo oa Moetsi:
Re na le thepa ea kelello e ikemetseng ea sistimi ea PIBM ea ho tiisa ka tšohanyetso, re hlahisa likarolo tsa boleng bo holimo tsa letsopa tse ntle ka boqhetseke.
Theknoloji e ncha e phunyeletsa mathata a ho feto-fetoha le ho petsoha ha dikgeo tse metsi tsa letsopa tse kgolo nakong ya ho lokisa, mme tshebetso ya sehlahiswa e ntlafaditswe haholo bakeng sa dikarolo tse kgolo tsa letsopa tse lokisitsweng ka mekgwa ya setso.
Ho polisha ha wafer ka sapphire ea Chemshun Ceramics ho entsoe ka mokhoa oa ho hlahisa PIBM. Ke theknoloji e tsoetseng pele ea ka hare. PIBM e atlehile ho rarolla bothata ba bohlokoa ba ho petsoha le ho fetoha ha li-ceramics tse kholo tsa alumina. Theknoloji ea PIBM e tla bula fensetere e 'ngoe ea li-ceramics tse ntle. Ha re hlahise feela poleiti ea boleng bo holimo ea ho polisha ea wafer ea ceramic ea alumina, empa hape le letoto le leng la li-ceramics tse kholo tse hloekileng tse kang li-substrate tsa ceramic tsa 1200x500x20mm bakeng sa lisebelisoa tsa tlhahiso ea LCD, litsela tsa ho delviery tsa semiconductor, likarolo tsa vacuum, likarolo tse akaretsang tsa mechini, li-ceramics tse sa keneleng likulo.
Sebopeho le boholo ba sehlahisoa
1. Poleiti ea ho Sebedisa ea Alumina Wafer / Tafole ea ho Phetla. Disiki, boholo ba lesale bo ka tlase ho 850mm, botenya ba 45mm.
2. Boto ea motheo ea Alumina bakeng sa LCD e le li-receptor tsa tšehetso/poleiti ea ho jara. Sebopeho se tšoana le boto e telele, bara e telele, boto e sekoere, boholo bo mosesaane ba boto bo ka tlase ho 1500 * 600mm, joalo ka: 1200x500x20, 1400x900x30 jj.
3. Lireile tsa tataiso tse ka tlase ho 1000 * 45 * 45mm.
4. Liphaephe tse se nang letho, lisilindara, liphaephe tsa motlakase tse se nang letho, jj. Ka boholo bo ka tlase ho 300 ~ 600 × L500mm.
5. Lihlahisoa tse ikhethileng tse nang le likarolo tse fapaneng tsa sebopeho lia amoheloa.
Paramethara e ka Sehloohong: (Lik'hemik'hale / tsa 'mele):
| Thepa | Ntho | Yuniti | Chemshun 99.7% Alumina Ceramics |
| Matlo a Kakaretso | Karolo e ka sehloohong | boima ba% | 99.7-99.9 |
| Botenya | gm/cc | 3.94-3.97 | |
| 'Mala | - | Lenaka la tlou | |
| Ho monya metsi | % | 0 | |
| Matlotlo a Mekaniki | Matla a ho Tenyetseha (MOR) 20 ℃ | Mpa(psix10^3) | 440-550 |
| Modulus e tenyetsehang 20℃ | GPa (psix10^6) | 375 | |
| Boima ba Vickers | Gpa(kg/mm2) R45N | >=17 | |
| Matla a ho Koba | Gpa | 390 | |
| Matla a ho Tenyetseha 25℃ | MPa(psix10^3) | 248 | |
| Ho Robeha ha Maqeba (KI c) | Mpa* m^1/2 | 4-5 | |
| Matlotlo a Thermal | Mocheso oa motlakase (20℃) | W/mk | 30 |
| Coefficient ea katoloso ea Thermal (25-1000℃) | 1x 10^-6/℃ | 7.6 | |
| Khanyetso ea Thermal Shock | ℃(∆ Tc) | 200 | |
| Mocheso o phahameng ka ho fetisisa oa tšebeliso | ℃ | 1700 | |
| Matlotlo a Motlakase | Matla a Dielectric (1MHz） | ac-kv/mm(ac v/mil) | 8.7 |
| Dielectric Constant (1 MHz) | 25℃ | 9.7 | |
| Ho hanyetsa molumo | ohm-cm (25℃) | >10^14 | |
| ohm-cm (500℃) | 2×10^12 | ||
| ohm-cm (1000℃) | 2×10^7 |
Mokhoa oa ho Bopa Mokhoa oa ho qeta oa Ceramic
Netefaletso ea boleng:
Lihlahisoa tse ling le tse ling tsa Batch li hlahlojoa laboratoring ea fektheri le Setsing sa Naha sa Tlhahlobo.
